To explain to you about the use of gas nail gun testing matters
2025-01-16
Always check before using a gas staple gun, but what should you be aware of?
1. Whether the gas pipe quantitative valve is correctly installed
Inspection method: Before putting the gas tank into the tool, press the nozzle of the quantitative valve forcefully to confirm whether the air is expelled, and rotate the quantitative valve with the degree of permeability to prevent poor blowing due to the poor roundness of the gas tank.
2. Whether the gas storage tank is correctly placed in the tool
Inspection method: After putting the gas tank into the tool, the nozzle of the quantitative valve should enter the white triangular column nozzle tube on the tool horizontally, at the same time, the bottom of the gas tank should naturally contact the gasket of the gas tank, can not float in the air, check whether there is sand in the nozzle tube of the tool, when the pipe is worn, the nozzle needs to be replaced, Xiaobao recommends that every time the gas nail is replaced.
3, the gas nail can slide freely in the nail groove, to ensure that the wire diameter of the gas ruthenium, center distance and other dimensions meet the requirements of the tool.
The gas nail gun assembly machine is actually a combination of the movement of the gap and the continuous movement of the assembly machine to play a role in the assembly machine, although the assembly machine is very common in the industry, but there is no number of operating positions of the assembly machine, the single station assembly can be divided into many different multi-station assembly machines, if divided according to its trajectory, Ash can also be divided into different grades.
It should be said that whether it is a circular table gas nail installer or a ring working machine, its installation has a certain amount of attention, which is also one of the characteristics of the installer, but also one of the standards to ensure its performance.
The pump can be driven by an ordinary compressor, different from the ordinary gas punching machine, the ordinary gas punching machine can only play 22MM gas nails, in addition, it also has a powerful force that can easily drive 40MM gas nails, the gas nail gun in general uses the energy generated by the instantaneous combustion of gas to push the piston, the rod on the piston hits the nail, The nails are quickly driven into the steel plate, concrete, brick or rock and other matrix, the gas nail gun does not use gas, saving costs, is a good assistant for aluminum doors and Windows and building installation.
The main advantages of gas nail guns are as follows.
1. There is no need for gas, gunpowder, and an ordinary compressor, which greatly saves costs.
2. The length of nails that can be nailed with gas nails is 14-40MM, and the strength is very strong.
3. The depth of nails can be adjusted.
4. Low noise, durable, and simple maintenance than ordinary gas nails.
TAG:
Next
Next:
Related Posts
Related introduction of the launch nail
MESSAGES
We will contact you within one working day. Please pay attention to your email.
+86-13473991874 (Manager Jia)
+86-18000688810 (Manager Jiao)
Factory: Yongnian District, Handan, Hebei Province, China
Office: Shijiazhuang City, Hebei Province, China